Lanternland fixtures are sold with a lifetime limited warranty to the original purchaser. All mechanical and electrical components carry a lifetime warranty against defects in workmanship or materials. If our product fails due to a defect in material or workmanship, Lanternland will repair or replace it free of charge. The warranty does not apply to: (a) damage caused by accident, abuse, mishandling, vandalism; (b) units which have been subject to unauthorized repair, opened or taken apart, other than the normal re-lamping; (c) units not properly installed and/or under abnormal use including certain climatic and environmental conditions; (d) damages exceeding the cost of the product; (e) any glass.
The obligation of this warranty is limited to repairing or replacing all or any part of the product which in the opinion of Lanternland shall be proved defective in materials or workmanship under normal use and service.
Never shall Lanternland be liable for any special or consequential damages, labor, repair or removal of defective part, or any other costs or warranty, expressed, implied or inferred.
Due to the handcrafted nature of this product dimensions listed are approximate and may vary slightly. It is natural for brass and copper to change color as they age. Slight variations in finish are a natural characteristic of brass and copper and do not constitute a defect in workmanship. Environmental influences determine the speed and nature of these color changes and they are neither predictable nor covered by warranty in any manner.
We reserve the right to charge for repair or replacement costs of items damaged through no fault of Lanternland. An estimate for such repairs will be quoted for your approval before beginning work. In the event a repair is needed due to acts or conditions beyond our control, the cost of shipping and handling is the responsibility of the owner. Return shipping will be charged to cover our costs.
Any modification to a Lanternland lighting product not made at the factory will void the UL listing as well as the Lanternland warranty policy.
Size: Medium | Dimensions: 34" H x 10.5" W x 12.5" D | Sockets: 2-60W Candelabra
Finish: Dark Brass | Glass: Seeded
Finish: Dark Brass | Glass: Seeded
Landon Sr. Wall Mount Copper Lantern with Bracket
Landon Sr. Wall Light with Bracket Outdoor Copper Lantern by Lanternland: Shown here in our burnished Dark Brass finish with Seeded Glass, is handmade in the USA from solid copper and brass for the highest possible quality outdoor lighting. Based on authentic historic designs the Landon Jr. is designed to complement a wide variety of period and rustic home styles and old houses including Spanish Colonial, Mission, Southwestern, Greek Revival, Colonial Revival, Bungalow and Log & Timber. Use indoors or outdoors as porch, patio or deck lighting. Ideal for wet, snowy, waterfront and salt air environments the Landon Jr. will never rust or corrode, guaranteed. Available your choice of two standard sizes, seven all-natural hand applied finishes and four unique styles of glass, this traditional outdoor lighting fixture includes free shipping and our lifetime warranty.
Finish Options
Choose from any of our eight all-natural copper and brass hand-applied finishes at no extra cost. Unlike painted or powdered coated finishes our natural finishes will never crack, rust or peel, guaranteed for life.
Each of our finishes is the result of an all-natural chemical process which mimics the natural aging process to produce a 'living finish'. Over time these finishes will gradually develop the beautiful natural patina copper and brass are known for increasing the value and beauty of your lanterns as time goes by while forming a natural protective barrier.
*Please Note: Because each of our all-natural finishes is hand applied the shade can vary.
*Click images to see larger image*
Brass Finishes
Antique Brass
Color guide: Aged Brass
Aged golden brass etched with dark highlights.
Dark Brass
Color guide: Brown
Burnished dark brown brass finish with a rich texture.
Raw Brass
Color guide: Golden Yellow
Classic, traditional untreated brass.
Verdi Green
Color guide: Green
Classic green patina in solid brass with rich dark overtones.Copper Finishes
Antique Copper
Color guide: Red-Brown
Copper darkened with red and brown highlights.
Dark Copper
Color guide: Black
Burnished dark grey finish darkens to true black.
Flamed Copper
Color guide: Dark Red-Brown
Flame heated to bring out natural highlights.
Raw Copper
Color guide: Copper
Classic, traditional untreated copper.Glass Options
Choose from any of our four distinctive styles of glass at no extra cost.
Clear Glass
Style guide: Traditional, Modern
Transparent high-quality glass.
Seeded Glass
Style guide: Rustic, Early American
Clear glass with round small 'seeds' or air bubbles.
Water Glass
Style guide: Rustic, Early American
Clear glass with larger, oval shaped 'seeds' or air bubbles.
White Glass
Style guide: Mission, Southwest
Opaque milky white high quality glass.
Finish Options
Choose from any of our eight all-natural copper and brass hand-applied finishes at no extra cost. Unlike painted or powdered coated finishes our natural finishes will never crack, rust or peel, guaranteed for life.
Each of our finishes is the result of an all-natural chemical process which mimics the natural aging process to produce a 'living finish'. Over time these finishes will gradually develop the beautiful natural patina copper and brass are known for increasing the value and beauty of your lanterns as time goes by while forming a natural protective barrier.
*Please Note: Because each of our all-natural finishes is hand applied the shade can vary.
*Click images to see larger image*
Brass Finishes
Antique Brass
Color guide: Aged Brass
Aged golden brass etched with dark highlights.
Color guide: Aged Brass
Aged golden brass etched with dark highlights.
Dark Brass
Color guide: Brown
Burnished dark brown brass finish with a rich texture.
Color guide: Brown
Burnished dark brown brass finish with a rich texture.
Raw Brass
Color guide: Golden Yellow
Classic, traditional untreated brass.
Color guide: Golden Yellow
Classic, traditional untreated brass.
Verdi Green
Color guide: Green
Classic green patina in solid brass with rich dark overtones.
Color guide: Green
Classic green patina in solid brass with rich dark overtones.
Copper Finishes
Antique Copper
Color guide: Red-Brown
Copper darkened with red and brown highlights.
Color guide: Red-Brown
Copper darkened with red and brown highlights.
Dark Copper
Color guide: Black
Burnished dark grey finish darkens to true black.
Color guide: Black
Burnished dark grey finish darkens to true black.
Flamed Copper
Color guide: Dark Red-Brown
Flame heated to bring out natural highlights.
Color guide: Dark Red-Brown
Flame heated to bring out natural highlights.
Raw Copper
Color guide: Copper
Classic, traditional untreated copper.
Color guide: Copper
Classic, traditional untreated copper.
Glass Options
Choose from any of our four distinctive styles of glass at no extra cost.
Clear Glass
Style guide: Traditional, Modern
Transparent high-quality glass.
Style guide: Traditional, Modern
Transparent high-quality glass.
Seeded Glass
Style guide: Rustic, Early American
Clear glass with round small 'seeds' or air bubbles.
Style guide: Rustic, Early American
Clear glass with round small 'seeds' or air bubbles.
Water Glass
Style guide: Rustic, Early American
Clear glass with larger, oval shaped 'seeds' or air bubbles.
Style guide: Rustic, Early American
Clear glass with larger, oval shaped 'seeds' or air bubbles.
White Glass
Style guide: Mission, Southwest
Opaque milky white high quality glass.
Style guide: Mission, Southwest
Opaque milky white high quality glass.
| Specifications | |
|---|---|
| Style | Spanish Colonial, Mission, Southwestern, Greek Revival, Colonial Revival, Bungalow and Log & Timber |
| Suggested Uses | Porch, Patio, Outside Wall, Garage, Entryway, Outdoor Areas, Walkway, Breezeway, Pool Area, Deck, Dock |
| Outdoor Use | Yes |
| Indoor Use | Yes |
| UL Listed | Yes |
| Wet Locations Compliant | Yes |
| Dark Sky Compliant | No. Available as custom option, |
| LED and CFL Compatible | Yes |
| Materials | Copper, Brass, Glass |
| Construction | Handmade, Made in USA |
| Voltage | 120V |
| Max Watts Per Socket | 60W |
| Bulbs Included? | No |
| Warranty | Lifetime Warranty - Click for Details |
| Return Policy | Return Policy - Click for Details |
| Shipping Policy | Shipping Policy - Click for Details |
